Wallpaper Steamer

Used for removing shingles from a roof

Cuts tile

Cuts tile

For sanding drywall

The perfect tool for stud and joist drilling - and a host of other applications. With a powerful Milwaukee-built motor and right angle drive head, the 1/2" D-Handle Right Angle Drill is flexible enough to handle a variety of applications. The powerful 7-amp motor delivers 0-500 RPM, so when combined with the two-speed head, you get 0-335 RPM on the low setting and 0-750 RPM on high. Helical-cut, heat treated gears deliver quiet performance and extended tool life with wood, metal, plastics and composites. The drill’s head and handle swivel 360°, and there’s a side handle for a secure grip and comfortable, controled operation. The QUIK-LOK® cord detaches easily for storage or service replacement. This 1/2" D-handle Right Angle Drill comes in an impact-resistant carrying case, with a 9/16" open-end wrench and 3/16" socket wrench.

The power to drill ½" holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5-amp, ½" Hammer Drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits. The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drill’s lightweight, balanced pistol-grip design reduces fatigue during a long work day. The kit includes a durable carrying case.

The new Deep Cut Band Saws deliver 2X more durability, best-in-class power at 11 Amps, revolutionary cut visibility and the industry’s largest cut capacity at 5" by 5". These Band Saws still deliver on the heritage of long-term reliability and performance that make Milwaukee Band Saws the standard in industrial metalworking, but now feature a new, exclusive Job Site Armor™ Technology and all metal direct drive system that provide game-changing durability. The Job Site Armor™ Technology is made of a proprietary composite material and has crush zone barriers that provide long lasting rugged protection. 

The speed and control you need to maximize productivity on drywall jobs. With a powerful 6.5-amp motor and variable-speed control, the Drywall Screwdriver is your tool of choice for drywall and framing applications. The ramp-off depth locator provides easy, no-slip depth adjustments for consistent driving, while the ergonomic, tactile grip and two-finger trigger enhance your comfort and balance. The all-metal gear case and diaphragm are designed for high durability. Use the removable belt clip with bit storage for increased portability and convenience on the jobsite.

The 15.0 Amp Super Sawzall® Recip Saw is the fastest, most durable recip saw in the world. It is the first Sawzall® Recip Saw to include Constant Power Technology™ which maintains constant speed and power under load for unmatched cutting performance. The 15.0 amp motor provides the industry's highest overload protection. The patented Gear Protecting Clutch extends gear and motor life by absorbing high impact forces caused by sudden blade lock-ups. The patented Counter Balance Mechanism reduces user vibration.

The Milwaukee M18 FUEL PACKOUT 2.5 Gallon Wet/Dry Vacuum is the most powerful small capacity 18V wet/dry vacuum, fully compatible with all Milwaukee PACKOUT modular storage system solutions. The POWERSTATE brushless motor delivers up to 60% more suction, giving users powerful performance to easily cleanup common wet and dry jobsite debris. Being PACKOUT compatible gives this tool unmatched mobility, saving down time spent hauling tools on and off the site. At just 87 dB(A), this vacuum is 2x quieter than traditional jobsite wet/dry vacuums. Users can use the vacuum on and off the PACKOUT stack, making this the most portable and versatile wet/dry cleanup solution available. The vacuum comes with an included HEPA filter for optimal dust and microparticle collection, as well as an included power tool adapter for efficient dust collection from other power tools. As a part of the M18 system of tools, it is powered by REDLITHIUM battery packs, which deliver up to 30 minutes of run time on a HIGH OUTPUT 8.0 Battery Pack in high mode, and over 50+ minutes of run time in low mode.

Milwaukee's 11 amp Sawzall® Reciprocating Saw is the most durable reciprocating saw on the market, and at only 7 pounds, it offers the best power to weight ratio in its class. The saw offers a 0-2800 strokes per minute variable speed trigger with 3/4 in. stroke length and a QUIK-LOK™ blade clamp for fast, tool-less blade changes

Milwaukee's 8" Metal Cutting Circular Saw delivers faster, cooler, cleaner, more affordable metal cutting. Forget the showers of hot metal chips and sparks that were once an aerial threat on metal construction jobsites. The 6370 shears the metal, producing a virtually spark-free wake and cool, burr and scorch-free edges that don't require post-cut finishing. Cool cut waste, in the form of metal shavings, is effectively contained with a durable magnesium blade shield and channeled into the saw's integral ChipTank. Cool cutting also means that materials can be handled almost immediately following a cut, reducing downtime. Driven by a powerful, 15 amp (1-3/4 max HP), 3,700 RPM motor and equipped with a full grill of razor-sharp, cermet-tip teeth, the 6370 tears through tough cuts without hesitation. Count on up to 10 gauge sheets and 1/4 in. steel plate cuts, all day, every day.

Tool-Free adjustable shoe base

Two adjustments fine tune the staple position

Includes Carrying Case and Safety Goggles

Safety is built into the shoe base

Uses 1" - 1½" 18Ga 1/4" crown staples

Operates on 70-90 PSI

Combination Rotary hammer drill kit designed for drilling or chipping concrete. Shocks reduce vibration. Clutch reduces bind up situations. Accepts all SDS Max chisels and bits

SHOCKS - Active Vibration Control® reduces vibration up to 50% while increasing user comfort and productivity.
Complete Torque Control (CTC)® - Patented 2 Stage clutch provides maximum control in bind up situations.
13 Amp motor provides maximum performance & overload protection; 210-415 rpm; 1430-2840 bpm.
11.7 ft lbs. of Impact Energy provides fast drilling and powerful chipping.
Rear handle mount means less bending over when using tool in downward chipping applications.
Trigger Lock On provides increased user comfort in extended use chipping applications.
Allows easy access to switch, motor, cord set, brushes and gear case for ease of service

Built with SENCO’s renowned durability, this heavy-duty framing nailer is designed for long-lasting performance on the jobsite. The robust internal design of the FramePro®701XP ensures that this tool will continue to work for you, consistently driving 34-degree paper taped framing nails up to 3-½" in length into the toughest substrates found on jobsites today. The aggressive claw-like safety makes toenailing a breeze, and the straight-line magazine offers a better line of sight for more accurate nail placement. The side of the magazine includes a construction ruler for quick and easy measurements on the fly, as well as a rafter hanger for added convenience. An adjustable tool-free depth-of-drive provides consistent depth control of the fastener depending on the work surface.

Roof pro, 455XP-XtremePro Roofing Coil Nailer, 15 Degree, Wire Collation, Contact Actuation, Fasteners Used 3/4" Through 1-3/4", 5 Year Warranty.

Built with SENCO’s renowned durability and performance, the FinishPro®42XP is the flagship tool for the professional finish carpenter. Featuring SENCO’s patented Never-Lube® design, the FinishPro®42XP eliminates the need for daily maintenance as well as the risk of oil spilling onto your worksurface due over oiling. Outfitted with a Magnesium main body, reinforced metal air cylinder, and high-strength driver the FinishPro®42XP is an extremely durable and lightweight tool that is perfect for all day use. The high-strength driver of the FinishPro®42XP allows the user to consistently drive 15-gauge 2-½" finish nails through the densest materials.

The SENCO FinishPro® 25XP has redefined the brad nailer category! Driving both slight and medium headed 18-gauge brads from 5/8" to 2-1/8" into the hardest substrates. The nailers metal construction and SENCO’s NeverLube® design make it extremely durable and easy to operate. The FinishPro®25XP is equipped with a no-mar pad that protects the work surface, and a square nose safety that is designed to keep the tool from slipping out of position.