74HP TURBO

7.1-10.5MPH

FUEL TANK 36.5GAL

LENGTH 133"

WIDTH 68"

HEIGHT 77.8"

ENCLOSED CAB

82"X14'

10K LOAD

2 5/16" BALL

1YD LIGHT WEIGHT BUCKET USED FOR LIFTING LIGHT MATERIALS

72" SNOWBLOWER ATTCH.

(ONLY GOES OUT ON ONE OF OUR SKIDSTEERS)

TAKES UP TO 9" TREE/BRANCH

GAS POWERED

35HP BRIGGS ENGINE

16GAL FUEL TANK

2" BALL HITCH

18' LONG

80" WIDE

DUEL AXEL

9500 LBS LOAD

18' LONG

80" WIDE

DUEL AXEL

LOAD UP TO 6,000LBS

8' LONG

5' WIDE

HAS GATE

2,100 LBS MAX LOAD

FLOSS FOR SALE IN STORE

3 BAG
3.5 CUFT, WHEELBARROW MIXER
2 CUFT OF HOLDING CAPACITY

110V

110V

110 V

110V - OFFER EITHER 15AMP OR 20AMP 

1" TO 8" CORE BITS

WET BITS. REQUIRES WATER

BOBCAT
OPERATING WEIGHT: 12,315LBS
TANK SIZE: 19 FUEL: DIESEL
LENGTH: 218.3"
HEIGHT: 100.1"
WIDTH: 77.2"
TRAVEL SPEED LOW: 1.8MPH
TRAVEL SPEED HIGH: 2.8MPH
DIG DEPTH: 157.2"
MAX DUMP HEIGHT: 171.6"

16" Concrete / Asphalt Saw.

14" Gas Concrete / Asphalt Saw. 
 Offered in both the K770 and K970 models

DESIGN
All hydraulic means easy maintenance, no downtime, and the most efficient use of your horsepower to get the job done. Moreover, weight, balance, stability, and tine speed allow this tiller to work where others can’t. In addition, the open design allows for easy access to the hydraulics when maintaining or repairing. The heavy design means your tiller works for you instead of tossing you around. As a result, counter-rotating tines break up the most difficult soil, clay, or sod. The tine drive motor is directly mounted to the tine shaft, resulting in a system so durable the original tiller was rented out for more than 20 years. The wheel drive and tine drive work independently of each other to allow your tilling travel speed to be adjusted to the soil conditions.

Scaffolding frames are the main components of scaffolding. The frames we manufacture conform to the most rigid tolerance tests in the industry, which is what makes our frames the most used and recognized on the market today. Our step frames are made in the USA with the highest quality components including ID coated tubing for extended life and powder coat finish for durability that exceed OSHA regulations. These scaffolding step frames consist of several beams of steel conjoined into a single unit with a ladder-like structure on one side. These allow workers to climb up the side of the scaffolding and are the most common type of scaffold frame.

Cross Braces are used in conjunction with scaffold frames to form sections. All cross braces are manufactured from high quality steel tubing and come with a galvanized finish. The braces we manufacture conform to the most rigid tolerance tests in the industry, which is what makes our braces the most used and recognized on the market today. Diagonal cross braces are the main connecting components of scaffolding and are absolutely critical to safe and reliable scaffolding. Our cross braces are made in the USA and exceed OSHA regulations. They are made of high quality steel connecting in the middle that creates a full cross (X) when opened up. Cross Braces determine the length of each scaffold section or the span between your frames.

Braces available in "hole end" or "notch end" types
End type to coordinate with your lock type
Replace the 0010 with 0009 when ordering "notch end" braces

ProJax Outrigger Package Narrow, Utility Scaffold (4 pieces)

For use with 0127-006-2

The power rake efficiently removes matted thatch from turf in 20" passes, and its rugged design withstands the most demanding use. Because the rotation is down sweep, the flails propel the PR forward, making it self-propelled and reducing fatigue. Additionally, because it weighs slightly more than other power rakes on the market, with steel guards, heavier wheels, premium bearings, and a 10-gauge steel engine base, the PR absorbs much of the vibration before it is transferred to the handle, which improves operator comfort and handling. Pictured: PR550H

The OS552H and OS553V conserves seed with Billy Goat’s exclusive Auto Drop feature by automatically starting or stopping seed drop with bale engagement. The heavy-duty bale controls both seed release and blade engagement. Select the correct drop rate without all the guesswork. The 25-lb capacity front mounted poly seed box won’t rust or dent. On board instructions are conveniently mounted under the lid to help set seed drop rates. Pictured: OS552H

24" Wide Self Propelled Brush Hog with 3 speed limited slip transaxle Great for over grown properties. This brush mower is great for clearing brush up to 6' and saplings up to 2.0" diameter

Billy Goat’s F601S Force blower features the next level of performance and productivity in push blowers. Forget the fatigue factor associated with heavy metal machines, this model is a remarkable 30% lighter than comparable steel units and weighs only 76 lbs., making it a breeze to roll around the yard.

Rounded composite housings coupled with 16-blade advanced fan technology completely eliminate traditional bends in metal housings. This eliminates air voids, reduces noise, lowers weight, and pushes the design envelope for blowing efficiency. There is also no rusting or denting and there is less stress on the engine shaft for longer life.

The result is a dramatic jump in productivity, ergonomics and reliability. When combined with industry leading wheels, ergonomic handle design and the patented Aim-n-Shoot™ airflow technology, the F601S is the ultimate property cleanup tool.