• 30" width at speeds up to 7.5 mph
• Raise and lower tines with foot pedal
• Fuel capacity extends the operating time
• Floating operator platform isolates the operator from vibrations for an exceptionally smooth ride

This York Rake is used in the 2" reciver of a truck or fullsize SUV

Self-Propelled walk behind plug aerator.

The York Rake Model TA25, 5' width 

The York Rake Model TA25, 5' width 

The York Rake Model TA1 4' width

Model 1320H: Honda GX390 13 HP
DIMENSIONS

Length: 77″
Width: 27″
Height: 44″
Tilling Width: 20″
Weight: 560 lbs.

• Patented commercial power steering offers effortless maneuverability with the pull of a trigger
• Variable speed technology - 6 forward and 2 reverse speeds with shift-on-the-fly transmisison
• Kohler Command Pro Multi Season engine - air intake rotates at 180 degrees for multi-season use
• Independent control levers allow simultaneous engagement of ground drive and broom for easy handling

Power Source 13hp Honda Engine

Weight 460 lbs

Bales / Minute 1 - 1.5

Discharge 45 - 50 ft

ITEM INFO:
2" BALL HITCH
Weight 730 lbs
Engine Honda GX270
Bed Height 32"
Log Opening 25"
Cycle Time Approx. 12 Seconds Complete Cycle
Splitting Force Approx. 30 tons

---------------------------------------------------------------

ITEM INFO:
2" BALL HITCH
Weight 730 lbs
Engine Honda GX270
Bed Height 32"
Log Opening 25"
Cycle Time Approx. 12 Seconds Complete Cycle
Splitting Force Approx. 30 tons

---------------------------------------------------------------

Cuts sod

5.5HP WALKBEHIND BILLY GOAT BLOWER FOR SMALL TO MEDIUM YARD CLEAN-UPS (PUSH)     

9HP S/PROPELLED BILLY GOAT BLOWER FOR LARGE YARD CLEAN-UPS  

BACKPACK BLOWER HUSQVARNA 570BTS USED FOR MEDIUM TO LARGE YARD CLEAN-UPS            

BACKPACK BLOWER, HUSQVARNA 150BTS USED FOR SMALL YARD CLEAN-UPS

BACKPACK BLOWER HUSQVARNA 580BTS USED FOR LARGE YARD CLEAN-UPS AND OUTDOOR AREAS.       

PRUNES TREE BRANCHES

TAKES UP TO 9" TREE/BRANCH

GAS POWERED

35HP BRIGGS ENGINE

16GAL FUEL TANK

2" BALL HITCH

DESIGN
All hydraulic means easy maintenance, no downtime, and the most efficient use of your horsepower to get the job done. Moreover, weight, balance, stability, and tine speed allow this tiller to work where others can’t. In addition, the open design allows for easy access to the hydraulics when maintaining or repairing. The heavy design means your tiller works for you instead of tossing you around. As a result, counter-rotating tines break up the most difficult soil, clay, or sod. The tine drive motor is directly mounted to the tine shaft, resulting in a system so durable the original tiller was rented out for more than 20 years. The wheel drive and tine drive work independently of each other to allow your tilling travel speed to be adjusted to the soil conditions.

The power rake efficiently removes matted thatch from turf in 20" passes, and its rugged design withstands the most demanding use. Because the rotation is down sweep, the flails propel the PR forward, making it self-propelled and reducing fatigue. Additionally, because it weighs slightly more than other power rakes on the market, with steel guards, heavier wheels, premium bearings, and a 10-gauge steel engine base, the PR absorbs much of the vibration before it is transferred to the handle, which improves operator comfort and handling. Pictured: PR550H

The OS552H and OS553V conserves seed with Billy Goat’s exclusive Auto Drop feature by automatically starting or stopping seed drop with bale engagement. The heavy-duty bale controls both seed release and blade engagement. Select the correct drop rate without all the guesswork. The 25-lb capacity front mounted poly seed box won’t rust or dent. On board instructions are conveniently mounted under the lid to help set seed drop rates. Pictured: OS552H

24" Wide Self Propelled Brush Hog with 3 speed limited slip transaxle Great for over grown properties. This brush mower is great for clearing brush up to 6' and saplings up to 2.0" diameter

Billy Goat’s F601S Force blower features the next level of performance and productivity in push blowers. Forget the fatigue factor associated with heavy metal machines, this model is a remarkable 30% lighter than comparable steel units and weighs only 76 lbs., making it a breeze to roll around the yard.

Rounded composite housings coupled with 16-blade advanced fan technology completely eliminate traditional bends in metal housings. This eliminates air voids, reduces noise, lowers weight, and pushes the design envelope for blowing efficiency. There is also no rusting or denting and there is less stress on the engine shaft for longer life.

The result is a dramatic jump in productivity, ergonomics and reliability. When combined with industry leading wheels, ergonomic handle design and the patented Aim-n-Shoot™ airflow technology, the F601S is the ultimate property cleanup tool.